Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Tamko Roofing Company in Long Beach: What to Know First
We’re an independent Tamko roofing company in Long Beach, and we repair and replace Tamko shingle roofs without the manufacturer’s red tape. Most Tamko repairs take one visit, with a written price before anyone climbs a ladder. If your Tamko roof is under warranty, we help you understand what’s covered and what isn’t; either way, you’ll know the exact cost in dollars before work starts.
This page is for homeowners in Long Beach who own a Tamko roof and want a crew that knows the product line specifically. If you’ve got granule loss, a leak near a valley, or shingles that look worse than they should for their age, call (562) 512-7366. We’ll walk the roof and tell you what’s actually going on.
Key Takeaways:
- We repair and replace Tamko roofs as an independent Long Beach roofing company, not as a Tamko dealer or authorized installer.
- Every job starts with a written price, so you decide with full information.
- Our techs are background-checked and uniformed, with shoe covers and drop cloths on every visit.
- We know which Tamko lines hold up in Long Beach’s salt air and which ones don’t.
How Tamko Products Fail – and How We Fix Them
Tamko shingles have specific failure patterns we see across Long Beach neighborhoods from Belmont Shore to Bixby Knolls. Here are the ones we run into most often:
- Heritage series granule shedding. Tamko’s Heritage line is common on Long Beach homes, and we regularly see premature granule loss on the south-facing slopes. The asphalt layer oxidizes faster under Long Beach’s constant sun exposure, and the granules let go before the shingle itself is spent. We inspect the mat underneath; if it’s intact, spot repairs work. If it’s brittle, it’s time to re-roof that slope.
- Lamarite slate composite curling at eaves. Homes that chose Tamko Lamarite for the slate look sometimes see curling along the first course near the gutters. This isn’t a materials defect as much as an installation detail; the starter course wasn’t nailed far enough back. Water gets behind the edge and the synthetic material deforms. Our fix involves re-seating the first course and verifying the drip edge actually protrudes far enough.
- Titan XT seal strip failure along ridge lines. The Titan XT series uses a reinforced seal strip, but the ridge cap shingles on Tamko roofs near the coast can lose their seal after a few seasons of salt fog and wind. It shows up as a rattling sound or caps that look slightly lifted. We reseal the caps with a compatible adhesive that handles Long Beach’s damp mornings.
- MetalWorks steel shingle fastener leaks. Tamko’s MetalWorks steel shingle panels are excellent in wind, but the rubber-grommet fasteners degrade in sun and salt exposure. Once the grommet cracks, the fastener becomes a slow leak point. We replace the fasteners one by one with ones rated for the coastal environment, and we reseat the panel edges so they don’t flex.
- Ventilation-related shingle degradation on older Long Beach bungalows. A lot of Tamko roofs we see on 1920s and 1930s bungalows in the Craftsman districts were installed without enough attic ventilation. The trapped heat cooks shingles from underneath, shortening their life by a decade. We fix the ventilation first, then address the shingles, so we’re not putting a new roof over a problem that will just come back.
Styles & brands we work with
Our Tamko Roofing Company Process
- 1
You call, a person answers. No voicemail tree. You describe what you’re seeing, and we schedule a roof walk. We ask if you have kids or pets home so we plan the visit around them.
- 2
We inspect and photograph everything. Erik or one of our techs gets on the roof and documents what’s happening. We look at the Tamko line you have, the install details, the flashing points, and the attic if accessible. You get photos and a plain-English explanation.
- 3
The written price comes first. Before any work starts, you get a line-item price in dollars. It covers the repair, the parts, the cleanup, everything. If we find something mid-job that changes scope, we stop and tell you, and you approve the change in writing before we continue.
- 4
Parts decision, made together. For Tamko repairs, we’ll tell you whether OEM shingles matter for warranty purposes or if a quality color-matched alternative works just as well. You decide, with our recommendation.
- 5
The repair and the test. We do the work, then test the repair with water where applicable, and walk the surrounding area to make sure nothing else is waiting to fail. Shoe covers stay on, drop cloths stay down.
- 6
The clean-up photo and the guarantee. Before the crew leaves, we photograph the cleaned-up job site and send it to you. Everything we do is covered by our 365-Day Done Right Promise.
What Tamko Roofing Company Costs in Long Beach
Here’s what we typically see for Tamko work in the Long Beach market:
- Shingle replacement (scattered, 5 – 15 shingles): $260 – $540, depending on pitch and access.
- Valley leak repair on a Tamko Heritage roof: $380 – $700, including new underlayment and re-seating the valley shingles.
- Ridge cap resealing (Titan XT or similar): $300 – $500 for an average Long Beach single-story.
- Full Tamko re-roof on a 1,400 sq ft ranch: $11,000 – $16,500, depending on tear-off layers, decking condition, and which Tamko line you choose.
What moves the price: roof pitch, number of stories, how much flashing needs replacement, and whether the decking under the shingles is sound. Salt-damaged decking near the coast adds cost because you can’t lay shingles over rotten plywood. You’ll see your exact number in writing before we touch anything. Call (562) 512-7366 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Long Beach Homeowners Call Birchbark Roofing Long Beach for Tamko Work
We’re a Long Beach roofing company that treats a Tamko job as its own thing, not a generic shingle repair. Our techs know the Heritage, Titan XT, Lamarite, and MetalWorks lines well enough to tell you which one you have by looking at the edge profile. Erik’s been working roofs across Long Beach long enough to know that the bungalows near Belmont Shore need different flashing attention than the mid-century boxes up by El Dorado Park, and that the salt air doesn’t forgive sloppy seating.
We back every job with the 365-Day Done Right Promise, and we’re part of the Cedarwell family of roofing companies, which has held local businesses to the Cedarwell Care Promise since 2000. If you’ve got a Tamko roof and you’re wondering whether you need a repair, a replacement, or just a second opinion, we’ll tell you straight. We also work with GAF, Owens Corning, and CertainTeed, so if a different material ends up being the smarter move for your roof, we can show you the comparison honestly.
A written price before anyone climbs a ladder, that’s where we start.
FAQs
We can repair and replace your Tamko roof as an independent Tamko service provider. We’re not affiliated with or authorized by Tamko, and we won’t imply otherwise. What that means in practice: we work on your roof based on what it actually needs, not on what a manufacturer’s preferred contract says. For warranty work, we’ll walk you through what Tamko will and won’t cover, and we’ll help document the failure if you want to file a claim. Call (562) 512-7366 and we’ll talk through your situation.
In most cases, normal repairs by a licensed roofing contractor won’t void your Tamko warranty, but there are specifics to know. Tamko’s warranty covers manufacturing defects on the materials themselves, not the labor or the installation. If a repair involves replacing damaged shingles with non-Tamko product, that won’t void the rest of the roof’s warranty, but it may affect coverage on those specific areas. We’ll help you decide whether OEM-matched Tamko shingles are worth the cost on your particular job.
Most Tamko shingle repairs are done in a single visit, usually 2 to 4 hours on site. Ridge cap work, valley repairs, and fastener replacement can run a bit longer, especially on steep or two-story Long Beach homes where ladder access is more complicated. We’ll give you a time window in the written estimate, and if we’re ever going to take longer, you’ll hear from us before it happens.
We repair and replace shingles and panels from Tamko’s main residential lines: Heritage, Heritage Woodgate, Titan XT, Lamarite, and MetalWorks. If you’ve got a commercial Tamko roof or a specialty line, let us know and we’ll tell you honestly whether we’re the right crew for it. We’d rather refer you to someone who knows that specific product than fumble through a roof we don’t know.
Granule loss on the shingle surface doesn’t automatically mean failure. Long Beach sun oxidizes the asphalt film on all shingle brands; the question is whether the underlying mat is still flexible and water-resistant. We look at the shingle edges for brittleness, check the seal strips, and check the attic for water stains. You’ll get photos and a straight answer, not a sales pitch. Schedule a roof walk by calling (562) 512-7366.
Contact Birchbark Roofing Long Beach for Tamko Roof Work
If you own a Tamko roof in Long Beach and you need a roofing company that knows the product, call (562) 512-7366. We’ll schedule a roof walk, give you a written price before any work begins, and leave your home cleaner than we found it. Estimates are free, and a live person answers the phone.
Written by Erik Lindgren, Owner, Birchbark Roofing Long Beach at Birchbark Roofing Long Beach, serving Long Beach and nearby areas.