Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Long Beach?
Metal roof installation in Long Beach, CA typically costs $14,500 to $38,000 for a standard single-family home, with most homeowners spending around $22,000 in 2026. If you’re pricing per square foot, expect $8 to $16 per square foot installed, depending on the metal profile, roof complexity, and whether you’re in neighborhoods like Belmont Shore, Naples, Bixby Knolls, or the Eastside. We’ll walk you through exactly where that money goes so you can budget with your eyes open. And before any work starts, you’ll see your specific number in writing, in dollars, not a ballpark.
Written by Erik Lindgren, Owner at Birchbark Roofing Long Beach, serving Long Beach since 2000.
Key Takeaways
- Most metal roofs in Long Beach run $14,500 – $38,000 total for a typical 1,800 – 2,400 sq ft home.
- The metal itself is $4 – $8 per square foot. Labor, underlayment, and tear-off make up the rest.
- Standing seam costs more than corrugated or ribbed panels; stone-coated steel sits at the high end.
- Coastal air means the right metal matters more in Long Beach than it does in, say, Riverside. We specify accordingly.
- A written price before any work starts is standard for us, never optional. Call (562) 512-7366 for a free estimate and we’ll walk the roof with you.
Metal Roof Installation Cost Breakdown (2026)
Here’s the honest math for a typical 2,000 sq ft single-story home in Long Beach, using mid-grade standing seam steel. Prices shift with your roof pitch, number of penetrations, and whether we’re tearing off the old roof or going over it.
| Cost Component | Typical Range (Long Beach, 2026) |
|---|---|
| Metal panels or shingles (materials only) | $4 – $8 per sq ft ($8,000 – $16,000 total) |
| Underlayment (synthetic, high-temp rated) | $0.50 – $1.00 per sq ft ($1,000 – $2,000 total) |
| Fasteners, flashing, trim, ridge caps | $1,200 – $2,800 |
| Tear-off of existing roof (if needed) | $1,500 – $3,200 |
| Labor, installation, and clean-up | $3 – $6 per sq ft ($6,000 – $12,000) |
| Permit (City of Long Beach) | $350 – $650 |
| Total installed cost | $14,500 – $38,000 |
If your roof has steep pitches, dormers, skylights, or a lot of HVAC penetrations, the labor line goes up. If it’s a simple rancher with a low pitch and easy access, you’ll land near the bottom of that range. We see both all the time in Long Beach, from the historic homes near Retro Row to the mid-century ranchers in Los Altos.
For a deeper look at the process, see our Metal Roof Installation in Long Beach guide, which covers material selection, timing, and what installation day looks like.
What Affects Metal Roof Installation Pricing in Long Beach
- Roof pitch and complexity. A 4:12 roof on a Lakewood-adjacent bungalow is straightforward. A 8:12 roof with multiple valleys in Naples costs more in labor because crews move slower, anchor more carefully, and cut more flashing by hand.
- Coastal corrosion concerns. Long Beach air carries salt, especially south of 7th Street and out toward the Peninsula. We specify aluminum and marine-grade coated steel more often here than we would inland. That’s a $1 – $2 per square foot difference, and it’s worth every cent. A roof near the water that isn’t marine-rated can show fastener corrosion within 8 – 10 years.
- Existing roof condition. If the old shingle roof has two layers, extensive rot, or termite damage at the eaves, tear-off and deck repair costs climb. In older Alamitos Beach and Bluff Heights homes, we sometimes find framing that needs reinforcement before metal can go down.
- Panel profile and gauge. Standard 29-gauge corrugated panels are the budget option. Standing seam 24-gauge steel runs higher. Stone-coated steel, which looks like tile from the street and is popular in Wrigley and El Dorado Park, sits near the top of the pricing table.
- Access to the roof. If your home is on a narrow street in Carroll Park with tight parking, or if the roof requires scaffolding rather than ladder access, that adds labor hours. We’ll flag it in your written estimate so there are no surprises on the invoice.
- Permit and code requirements. The City of Long Beach requires permits for re-roofing, and depending on your zone, there may be historic district considerations. We handle the paperwork and schedule inspections as part of the job.
How to Save on Metal Roof Installation
Metal roofing is a premium product, but there are smart ways to keep the number reasonable without cutting corners on the parts that matter.
- Choose a simpler panel profile. Corrugated and ribbed panels cost less than standing seam and perform well on detached garages, workshops, and lower-visibility roof planes. We’re happy to show you both in person and talk about where each makes sense.
- Re-roof over a single layer when code allows it. If your existing roof is a single layer of asphalt shingles in good structural shape, Long Beach code sometimes permits going over it. That eliminates tear-off costs entirely and keeps old shingles out of the landfill.
- Plan the job for off-peak season. Late fall and early winter are slower for roofing in Southern California. Scheduling flexibility can mean a better labor rate, because crews stay busy year-round here thanks to the mild climate.
- Group work with a neighbor. If you and a neighbor both need roofs, we can sometimes share mobilization costs. It’s not a formal discount, but it’s real savings when it works out geographically.
- Get a free estimate and a written price. This costs you nothing. Call (562) 512-7366 and we’ll do a full roof inspection, talk through your goals, and hand you a written price in dollars before you decide anything. Estimates are free, always.
One thing we never recommend: choosing the thinnest metal panel to save a few hundred dollars. In Long Beach’s salt air, panels that are too thin will oil-can in the sun and wear prematurely. We’d rather spec the right material and be honest about what it costs than put a roof on that we’ll both regret in five years. Birch bark was one of the first roofing materials: light, tough, and made to shed water. We think about that whenever we’re choosing panel gauges for a home near the coast.
Metal vs. Asphalt: The Real Price Math in Long Beach
Asphalt shingle roofs in Long Beach run $8,500 to $16,000 for the same 2,000 sq ft home. That’s a meaningful gap upfront. But here’s the calculation most homeowners don’t see until year ten or twelve.
An asphalt roof in Long Beach lasts 18 to 22 years with good ventilation and maintenance. A metal roof installed correctly lasts 45 to 60 years, and many manufacturers warranty their metal panels for 40 years or more. If you’re planning to stay in your home, you’ll re-roof with asphalt at least once, probably twice, before the metal roof shows meaningful wear.
Metal also handles Long Beach’s specific conditions differently. The marine layer doesn’t degrade metal the way it does asphalt. The intense August sun doesn’t bake metal into brittleness the way it does shingles. And metal sheds water faster during the occasional heavy downpour we get in El Niño years, which matters on flat and low-slope portions of Long Beach roofs.
If you’re not sure which way to go, we’ll help you run the numbers both ways. No pressure, just math, written out where you can read it. Our home page has more on how we approach every roofing project in Long Beach.
What to Expect When We Install Your Metal Roof
We know the roof itself is only half the concern. The other half is what happens to your house while the work is going on. Here’s the honest sequence.
Day of the Estimate
We arrive on time. We inspect the roof from top to bottom, check the attic, look at flashing, and measure everything. Then we sit down with you and write the price, in dollars, before we leave. No ranges, no verbal ballpark. You’ll know exactly what the job costs and exactly what’s included.
Before the Crew Arrives
You’ll get the names of the technicians coming to your home. Everyone is background-checked and uniformed. If you have kids or pets, we’ll coordinate the door schedule with you ahead of time, so the dog doesn’t bolt and the toddler’s nap isn’t interrupted by a knock.
During the Job
Shoe covers at the door, drop cloths through the hallway, and all materials staged where they won’t crush your plantings or block your cars. If we’re removing the old roof, the debris goes straight into a trailer, not onto your lawn. We ask before we move anything in your yard. It’s your home, not a job site.
Before We Call It Done
We photograph the entire clean-up and show it to you. Walk the perimeter together. Check the gutters. We don’t leave until you’ve seen the property the way it should look: like we were never there, except for the new roof.
Every Birchbark Roofing job carries the 365-Day Done Right Promise. If it’s not done right, we make it right. That’s stamped on every job we do, and it applies to every repair and replacement we perform.
FAQs – Metal Roof Installation Cost
How much does a standing seam metal roof cost in Long Beach?
A standing seam metal roof in Long Beach runs $18,000 to $38,000 for a standard 2,000 sq ft home, or roughly $9 to $16 per square foot installed. The higher end reflects homes near the coast where marine-grade materials and additional underlayment are required. Call (562) 512-7366 and we’ll give you a written price for your specific roof, free of charge.
Is metal roofing worth the extra cost in Long Beach?
If you plan to stay in your home more than 12 to 15 years, the math typically favors metal. The upfront cost is $6,000 to $22,000 more than asphalt, but metal lasts 45 to 60 years versus 18 to 22, and it handles coastal air and intense sun better. If you’re selling in the next five years, asphalt may make more financial sense. We’ll help you run both scenarios honestly.
Can you install a metal roof on a flat or low-slope Long Beach roof?
Yes, with the right panel profile and underlayment. Many Long Beach homes have flat or near-flat sections, especially in areas like Belmont Heights and Rose Park. These require mechanically seamed panels and specific underlayment systems, which run $12 to $16 per square foot. Not every roofer wants to tackle low-slope metal; we’ve done it for years and we’ll show you the right spec for your roof.
How long does a metal roof take to install in Long Beach?
Most residential metal roofs in Long Beach take 5 to 9 working days, depending on size and complexity. A simple one-story rancher might be done in 4 days. A two-story home with multiple roof planes, dormers, and tear-off might run 10 to 12. We’ll give you a clear timeline in your written estimate, and we stick to it.
Is it cheaper to repair or replace my metal roof?
If the roof is under 20 years old and the damage is localized, repair is almost always cheaper: $450 to $1,800 for most panel replacement or flashing repairs. If the roof is older, has multiple failing seams, or the underlayment is compromised, replacement at $14,500 to $38,000 is the better long-term call. Call (562) 512-7366 and we’ll inspect it and tell you straight, with photos, before you spend a dollar.
Get Your Exact Metal Roof Price in Writing
If you’re considering a metal roof in Long Beach, don’t guess. We’ll come to your home, walk the roof with you, and hand you a written price in dollars before any work starts. That’s not a premium service; it’s how we do every job, every time. You’ll know the exact number, the exact materials, and the exact timeline. A live person answers the phone 24 hours a day, 7 days a week, including nights and weekends. Call (562) 512-7366 for your free estimate.
Pricing reflects the Long Beach market as of 2026. Birchbark Roofing Long Beach offers free estimates – call (562) 512-7366.
What Our Customers Say
"New roof after hail. They covered everything below, kept the site neat each day, and did a full nail sweep of the whole yard twice. Thoughtful people."
- Caroline Prejean"Roof repair and they were meticulous about the cleanup, tarps over the garden beds and a magnet sweep for nails. We have a dog and a toddler so that mattered a lot."
- Thaddeus Bloom"Good work on some storm damage. The two days of tear off were loud and our dog was a wreck, which they had warned us about. Can't fault the care or the cleanup."
- Byron Teixeira